Kramer FC-31xl, User Manual

Page: 7 / 14

Your FC-31xl UXGA to DVI Converter
5
4.1 DIP-switch Settings
Figure 2 and Table 3 define the DIP-switches.
Figure 2: DIP-switch Definitions
Table 3: DIP-switch Definitions
DIP-switches Set to adjust the:
1 to 3 (Vs) Vertical position on the screen
4 to 8 (Hs) Horizontal position on the screen
9 to 12 (SHARP) Sharpness of the picture
To adjust the vertical position of the image, set the DIP-switches as
required, according to Table 4 .
Table 4: (Vs) Vertical Positioning DIP-switch Settings
In this state: 1 2 3
Shift Down (4 steps) OFF OFF OFF
Shift Down (3 steps) ON OFF OFF
Shift Down (2 steps) OFF ON OFF
Shift Down (1 step) ON ON OFF
No shift OFF OFF ON
Shift Up (1 step) ON OFF ON
Shift Up (2 steps) OFF ON ON
Shift Up (3 steps) ON ON ON
To adjust the horizontal position of the image, set the DIP-switches as
required, according to Table 5 .
Table 5: (Hs) Horizontal Positioning DIP-switch Settings
In this
state:
4 5 6 7 8
In this
state:
4 5 6 7 8
Shift Left
(16 steps)
OFF OFF OFF OFF OFF No Shift OFF OFF OFF OFF ON
Shift Left
(15 steps)
ON OFF OFF OFF OFF Shift Right (1
step)
ON OFF OFF OFF ON
Shift Left
(14 steps)
OFF ON OFF OFF OFF Shift Right (2
steps)
OFF ON OFF OFF ON
Shift Left
(13 steps)
ON ON OFF OFF OFF Shift Right (3
steps)
ON ON OFF OFF ON
Shift Left
(12 steps)
OFF OFF ON OFF OFF Shift Right (4
steps)
OFF OFF ON OFF ON
Shift Left
(11 steps)
ON OFF ON OFF OFF Shift Right (5
steps)
ON OFF ON OFF ON
Shift Left
(10 steps)
OFF ON ON OFF OFF Shift Right (6
steps)
OFF ON ON OFF ON
Shift Left
(9 steps)
ON ON ON OFF OFF Shift Right (7
steps)
ON ON ON OFF ON
Shift Left
(8 steps)
OFF OFF OFF ON OFF Shift Right (8
steps)
OFF OFF OFF ON ON