![background image](http://html1.mh-extra.com/html/kramer/dip-31/dip-31_user-manual_2002158014.webp)
Kramer Electronics Ltd.
DIP-31
– Operating DIP-31
12
Operating DIP-31
The
DIP-31
can be operated using any of the following methods:
•
Front panel buttons.
•
Remote contact-closure switch, (see
Connecting Remote Control Switches
).
•
Operating DIP-31 Remotely Using Web Pages
).
•
).
Locking EDID
To lock the EDID and prevent the stored EDID (either default or read from a device) from
being overwritten:
•
Send a Protocol 3000 command, (see
).
•
).
Resetting DIP-31
The
DIP-31
can be reset to factory default by either:
•
Using the button on the rear panel.
•
).
To perform a soft reset of the DIP-31:
•
Briefly press the Reset button.
The device resets.
To reset the DIP-31 to factory default parameters:
•
Press and hold the Reset button for five seconds.
The device is reset to factory default parameters.
Analog Audio Output Volume Control
The analog audio output volume can be controlled using different methods:
•
•
Using the remote, contact-closure switches connected to pins 3 and 4 of the Remote
Connecting Remote Control Switches
•
Using P3000 commands to control the volume (see
The volume is adjustable from -83dB to +24dB in steps of 0.5dB.