Kramer DIP-31, User Manual

Page: 17 / 67

Kramer Electronics Ltd.
DIP-31
– Operating DIP-31 Remotely Using Web Pages
15
Operating DIP-31 Remotely Using
Web Pages
The DIP-31 can be operated remotely using the embedded Web pages. The Web pages are
accessed using a Web browser and an Ethernet connection.
Before attempting to connect:
•
Ensure that your browser is supported (see Technical Specifications on page 28 ).
•
Ensure that JavaScript is enabled.
The syntax of writing numbers with a prefix of zero is parsed as an octal number. For
example, "0123" represents the decimal number 83.
The Web pages work with a minimum resolution of 1024 x 768.
Browsing DIP-31 Web Pages
In the event that a Web page does not update correctly, clear your Web browser’s cache by
pressing CTRL+F5.
To browse the DIP-31 Web pages:
1. Open your Internet browser.
2. Type the IP number of the device (see Default IP Parameters on page 28 ) in the
Address bar of your browser.
If authentication is enabled, the following window appears ( Figure 7 ) and you must enter the
valid username ( Admin ) and password ( Admin ) to access the Web pages.
Figure 7: Entering Logon Credentials