Kramer Electronics Ltd.
ASPEN-32UFX, ASPEN-1616UX, VS-8UFX
– Protocol 3000
50
X-ROUTE
Command Name
Permission
Transparency
Set:
X-ROUTE
End User
Public
Get:
X-ROUTE?
End User
Public
Description
Syntax
Set:
Send routing command to matrix
#X-ROUTE
␠
out_signal_id,in_signal_id
␍␊
Get:
Get routing status
#X-ROUTE?
␠
out_signal_id
␍␊
Response
Set / Get: ~nn
@X-ROUTE
␠
OUT_signal_id,in_signal_id
␍␊
Parameters
out_signal_id
–
format for identifying specific outputs:
OUT.SDI.X.VIDEO.1
(
X
= port/output # as
written on the device panel), for example,
OUT.SDI.5.VIDEO.1
(PORT/OUTPUT 5).
in_signal_id
– format for identifying specific inputs:
IN.SDI.X.VIDEO.1
(
X
= port # as written on the
device panel), for example,
IN.SDI.1.VIDEO.1
(PORT/INPUT 1).
Response Triggers
Notes
It is recommended to use the command
#SIGNALS-LIST?
to get the list of all signal IDs available in the
system and which can be used in this command.
VIDEO
and
1
are, respectively, the default
<signal_type>
and
<index>
in this command and are
implied even if not written:
#X-ROUTE OUT.SDI.5,IN.SDI.1
is interpreted as:
#X-ROUTE OUT.SDI.5.VIDEO.1,IN.SDI.1.VIDEO.1
Example
Route INPUT 1 to OUTPUT 5:
#X-ROUTE OUT.SDI.5.VIDEO.1,IN.SDI.1.VIDEO.1<CR>
-OR-
#X-ROUTE OUT.SDI.5,IN.SDI.1<CR>