![background image](http://html1.mh-extra.com/html/kramer/aspen-1616ux/aspen-1616ux_user-manual_2001095031.webp)
Kramer Electronics Ltd.
ASPEN-32UFX, ASPEN-1616UX, VS-8UFX
– Protocol 3000
29
Protocol 3000
The
ASPEN-32UFX, ASPEN-1616UX, VS-8UFX
12G SDI Matrix Switcher
can be operated
using the Kramer Protocol 3000 serial commands. The command framing varies according to
how you interface with the
ASPEN-32UFX, ASPEN-1616UX, VS-8UFX
.
Generally, a basic video input switching command that routes a layer 1 video signal to HDMI
out 1 from HDMI input 2 (ROUTE 1,1,2), is entered as follows:
•
Terminal communication software, such as Hercules:
The framing of the command varies according to the terminal communication software.
.
•
K-Touch Builder (Kramer software):
•
K-Config (Kramer configuration software):
All the examples provided in this section are based on using the K-Config software.
You can enter commands directly using terminal communication software (e.g., Hercules) by
connecting a PC to the serial or Ethernet port on the
ASPEN-32UFX, ASPEN-1616UX,
VS-8UFX
. To enter
␍
press the Enter key (
␊
is also sent but is ignored by the command
parser).
Commands sent from various non-Kramer controllers (e.g., Crestron) may require special
coding for some characters (such as, /X##). For more information, refer to your controller’s
documentation.