![background image](http://html.mh-extra.com/html/kramer/908/908_user-manual_2000502024.webp)
908 - 908 Commands in Protocol 3000
21
9
908 Commands in Protocol 3000
This RS-232/RS-485 communication protocol lets you control the machine from
any standard terminal software (for example, Windows® HyperTerminal
Application) and uses a data rate of 115200 baud, with no parity, 8 data bits, and 1
stop bit.
This section describes all commands sent to the
908
. For an explanation of the
syntax and use of Protocol 3000, see Section
9.10
.
9.1
Operating Commands
Following are the specific commands that the room controller (RC device) sends to
the
908
to operate the external devices.
9.2
Help Commands
Command
Syntax
Response
Protocol handshaking
#CR
~OKCRLF
9.3
Device Initiated Messages
Command
Syntax
Start message
Kramer Electronics LTD. , Device Model Version
Software Version
Switcher actions:
Audio channel has switched (breakaway mode)
AUD IN>OUT
9.4
Result and Error Codes
Syntax
Command ran successfully, no error.
COMMAND PARAMETERS OK
Protocol Errors:
Syntax error
ERR001
Command not available for this device
ERR002
Parameter is out of range
ERR003
Unauthorized access (command run without the
matching login).
ERR004
Summary of Contents for 908
Page 2: ......