![background image](http://html.mh-extra.com/html/kramer/908/908_user-manual_2000502015.webp)
12
908 - Operating the 908
5
Operating the 908
You can operate your
908
using:
The front panel buttons (see
Section
5.1
)
PC, touch screen system, or other serial controller via RS-232 serial
commands (see
Section
5.2
)
The Ethernet via the embedded Web server (see
Section
5.3
)
The included RC-IR3 Infrared Remote Controller (see
Section
5.4
)
5.1
Using the Front Panel Buttons
The front panel buttons let you:
Select an input, by pressing the INPUT 1 or the INPUT 2 button
Adjust the sound
Mute the sound by pressing the MUTE button
To adjust the sound of the output signal:
1. Press the sound component that you want to adjust (LOUD, BASS, MID,
TREBLE, BAL or VOLUME). The button illuminates.
2. Turn the adjustment knob to adjust the setting.
Note
: To enable remote volume control via the 10V VOL connector (using for
example, the Kramer
RC-63A
), you must disable the local digital volume control by
pressing and holding the VOLUME button on the front panel for several seconds.
The LED flashes to indicate that remote control is enabled. In this mode, volume
control via software ("Set simple audio volume" P3000 command, see Section
9.6
)
is disabled. To disable remote control, press and hold the VOLUME button and the
LED lights solid.
Summary of Contents for 908
Page 2: ......