Step 5: Set the devices
To set the
KDS-EN6
/
KDS-DEC6 IP address via channel buttons (by default, the IP address is 192.168.1.39 for each device):
1. Connect the device to the 24-48 VDC power adapter and connect the adapter to the mains electricity. The ON LED lights
green and the LINK flashes (indicating that no streaming activity is detected).
2. Press and hold
for 3 seconds.
3. Press
or
to select DH (DHCP) or SC (static) IP address setup.
4. If you selected DHCP (for Static, go to the next step):
For
KDS-DEC6
, press and hold
or
for 3 seconds to save your selection.
The channel display flashes “
--
” 3 times and the device reboots.
For
KDS-EN6
,
the channel display flashes “
ID
” 3 times. Continue to set the channel number for the
KDS-EN6
.
When setting to DHCP we recommend that you contact your IT administrator for setting the system IP
addresses.
5. If you selected Static, press and hold
or
for 3 seconds to save your selection.
The channel display flashes “
IP
” 3 times and the device reboots.
6. Press
or
to set the IP address.
7. Press and hold
and
for 3 seconds to save your selection.
To set the Channel Number via channel buttons
The
KDS-DEC6
channel number is set by simply pressing the
or
buttons at any time.
The
KDS-EN6
channel number can be set
immediately after
the IP address is set (via either static or DHCP).
To set the channel number for KDS-EN6:
1.
Wait until the channel display flashes “
ID
” 3 times.
2. Press
or
to select the channel number.
3. Press and hold
and
for 3 seconds to save your selection.
The channel display flashes “
--
” 3 times and the device
reboots.
To set the IP address via the web pages:
1. Connect the
KDS-EN6
/
KDS-DEC6
Ethernet port to the Network and power the device.
2. Access the embedded Web pages.
3. In the Network tab select the IP mode.
4. If you selected Static, type in the IP address.
When setting to DHCP we recommend that you contact your IT administrator for setting the system IP
addresses.
5. Click
Apply
and reboot the device.
To set the Channel Number via web pages:
1. Connect the
KDS-EN6
/
KDS-DEC6
Ethernet port to the Network and power the device.
2. Access the embedded Web pages.
3. In the System tab select Utilities.
4. In the Console API Command text box enter the following command:
For the
KDS-EN6
:
"
astparam s multicast_ip 225.0.100.00X; astparam s hostname_id 000X; astparam s
reset_ch_on_boot n; astparam save
;"
where X=Channel number
Click
Apply
.
Power cycle the device
For the
KDS-DEC6
:
"
Switchto X
"
where X=Channel number
Click
Apply
