KDS-EN6
/
KDS-DEC6 Quick Start (P/N: 2900-300787QS REV 2)
P/N:
2 9 0 0 - 3 0 0 7 8 7 QS
Rev: 2
Scan for full manual
KDS-EN6, KDS-DEC6 Quick Start Guide
This guide helps you install and use your
KDS-EN6
/
KDS-DEC6
for the first time.
www.kramerav.com/downloads/KDS-EN6
t or
www.kramerav.com/downloads/KDS-DEC6
download the latest user manual and check if firmware upgrades are available.
Step 1: Check w
hat’s in the box
KDS-EN6
Video Encoder
1 Bracket set for TOOLS
KDS-DEC6
Video Decoder
1 Quick start guide
Step 2: Install the KDS-EN6/KDS-DEC6
To mount the
KDS-EN6
/
KDS-DEC6
in a rack, use an
RK-T2B
rack adapter. Alternatively, attach the rubber feet to the underside of
the
KDS-EN6
/
KDS-DEC6
and place it on a table.
A Kramer TOOLS™ can also be mounted on a desk top, wall or similar area.
Fasten a bracket on each side of the TOOLS using the two M3x8 screws (supplied). Use the flat-head screws (supplied) to fix the
TOOLS to the mounting surface or enable it to slide in place.
Step 3: Connect the inputs and outputs
Always switch OFF the power on each device
before connecting it to your
KDS-EN6
/
KDS-DEC6
. For best results, we
recommend that you always use Kramer high-
performance cables to connect AV equipment to
the
KDS-EN6
/
KDS-DEC6
.
Step 4: Connect the power
By default, KDS-EN6 and KDS-DEC6 are
set to PoE. If you are not powering the
device via PoE, connect the
KDS-DEC6
and the
KDS-EN6
each to the 24-48 VDC
power adapter and connect the adapter to
the mains electricity. If 48V DC power is
connected, PoE is automatically disabled.