![background image](http://html.mh-extra.com/html/kramer/102mx/102mx_quick-start-manual_2001801002.webp)
Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your
102MX
.
To achieve specified extension distances, use the recommended Kramer cables available at
www.kramerav.com/product/102MX
Using third-party cables may cause damage!
Step 5: Connect power
Connect the power cord to
102MX
and plug it into the mains electricity.
Safety Instructions (See
for updated safety information)
Caution:
•
For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
•
There are no operator serviceable parts inside the unit.
Warning:
•
Use only the power cord that is supplied with the unit.
•
Disconnect the power and unplug the unit from the wall before installing.
Step 6: Operate 102MX
Using a Microphone:
1. Connect the microphone to the
MIC/LINE 1 IN
connector.
2. Press the
COND. MIC
button to use a powered condenser microphone.
Release the
COND. MIC
button to use an unpowered dynamic
microphone.
3. Press the
MIC SELECT
button.
Using the Talk-Over Function:
Press the
TALK OVER
button.
102MX
automatically inserts the mic signal and fades
the source of LINE 2 IN. The unit becomes a fader
instead of a mixer.
Technical Specifications
Inputs:
Mic/line 1: 10mV/1.6kΩ, 1Vpp/10kΩ, on 6.5mm phone connector;
Line 2: 1Vpp/10kΩ, stereo on RCA connectors
Outputs:
Line level, stereo, up to 5.6Vpp/150Ω on RCA connectors
Bandwidth (-3db):
100kHz
Gain Range:
−12dB to 68.5dB (mic); −12dB to +8.8dB (line)
Diff. Phase:
0.05Deg.
S/N Ratio:
69dB
Control:
Mic/line 1 level, line 2 level, master level rotary controls, condenser/dynamic mic, line/mic, talkover selection switches
Audio THD+Noise:
0.018%
2nd Harmonic:
0.002%
Power Consumption:
12V DC, 40mA
Operating Temperature:
0° to +40°C (32° to 104°F)
Storage Temperature:
-40° to +70°C (-40° to 158°F)
Humidity:
10% to 90%, RHL non-condensing
Dimensions:
12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
Weight:
0.25kg (0.55lbs) approx.
Accessories:
Power supply, mounting bracket
Specifications are subject to change without notice at