38
OIE 12en Edition 2019-02
Operating Instructions
Menu 2: General settings
M
e
n
u
d
e
s
c
ri
p
ti
o
n
2.09 Select density determination
2 density tables are available for determining the
density of 2 different liquids. Alternatively a
density calculation for fuel oils can be carried
out. If density calculation is selected, only menu
item 6.20 is available.
2.10 Number of decimal places
The number of decimal places can be selected
on this page. 1 – 3 decimal places can be
selected. Display without decimal place is not
possible.
2.11 Display start message
The display of the start message can be
activated or deactivated.
2.12 Function pick up
The setting of the pick up type has to be adapted
to the pick up used.
Available signals:
□
PNP
□
Namur
□
NPN
Either PNP or NPN can be selected for push-pull
pick ups.
2.13 Function pulse inputs
If one pick up each is used per volumeter, the
"Counter" function is selected. "Encoder" is used
if the volumeter is equipped with 2 pick ups (flow
direction detection option).
2.14 Link channel
The link can be selected when 2 volumeters are
used:
□
"A-B" is used for difference calculation
(consumption measurement).
□
"A+B" is used for sum calculation
(combination of two measuring sections).
2.15 Threshold value A-B
Setting
Description
Table 1
Select density table 1, see
"6.01 Density table 1 Point 1",
page 45
Table 2
Select density table 2, see
"7.02 Point 1", page 46
Fuel oils
calculation
Select density calculation for
fuel oils, see "6.20 Density
calculation", page 45
2.09 Setting
Select density
determination:
Table 1
2.10 Setting
Decimal
Places:
1
2.11 Setting
Display
Start message:
Yes
2.12 Setting
Function
Pick up:
PNP
2.13 Setting
Function
Pulse inputs:
Counter
2.14 Setting
Link
Channel:
A-B
2.15 Setting
Threshold value
A-B:
0.0 l/min
