Kraissmann ERT'450, User Manual

Page: 7 / 16

Electric grass trimmer | 7
ENGLISH
Danger!
When using the equipment, a few safety precautions must
be observed to avoid injuries and damage. Please read the
complete operating instructions and safety regulations
with due care. Keep this manual in a safe place, so that
the information is available at all times. If you give the
equipment to any other person, hand over these operating
instructions and safety regulations as well. We cannot
accept any liability for damage or accidents which arise
due to a failure to follow these instructions and the
safety instructions.
SAFETY REGULATIONS
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regulations and
instructions may result in an electric shock, fi re and/or
serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
PROPER USE
The equipment is designed for cutting lawns and small
areas of grass in private and hobby gardens.
The equipment is to be used only for its prescribed pur
-
pose. Any other use is deemed to be a case of misuse. The
user / operator and not the manufacturer will be liable
for any damage or injuries of any kind caused as a result
of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in com
-
mercial, trade or industrial businesses or for equivalent
purposes.
TECHNICAL DATA
Power, W ...........................................................................450
Voltage, V .........................................................................230
Frequency, Hz ....................................................................50
No load speed, min
-1 ..................................................12000
Cutting circle, mm ...........................................................230
SOUND AND VIBRATION
Sound and vibration values were measured in accordance
with EN 60745.
L
pA
sound pressure level ..................................81.3 dB(A)
K
pA
uncertainty ...............................................................3 dB
L
WA
sound power level ......................................94.4 dB(A)
K
WA
uncertainty ..............................................................3 dB
Wear ear-muffs
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Vibration emission value a
h
= 6.53 m/s2
K uncertainty = 1.5 m/s2
The specified vibration value was established in accor
-
dance with a standardized testing method. It may change
according to how the electric equipment is used and may
exceed the specifi ed value in exceptional circumstances.
The specified vibration value can be used to compare the
equipment with other electric power tools.
The specified vibration value can be used for initial as
-
sessment of a harmful effect.
Keep the noise emissions and vibrations to a min -
imum.
▶ Only use appliances which are in perfect working or -
der.
▶ Service and clean the appliance regularly.
▶ Adapt your working style to suit the appliance.
▶ Do not overload the appliance.
▶ Have the appliance serviced whenever necessary.
▶ Switch the appliance off when it is not in use.
▶ Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in accor -
dance with instructions, certain residual risks
cannot be rules out. The following hazards may
arise in connection with the equipment’s construc
-
tion and layout:
1. Lung damage if no suitable protective dust mask
is used.
2. Damage to hearing if no suitable ear protection is
used.
3. Health damage caused by hand-arm vibrations if
the equipment is used over a prolonged period or is
not properly guided and maintained.
BEFORE STARTING THE
EQUIPMENT
Before you connect the equipment to the mains supply