Assembly
This assembly guide will describe always left side of the plane when it comes to symmetric parts. I
recommended to use medium viscosity CA glue. You can use CA glue accelerator for faster curing
time. Dry fit all the parts before gluing them together. Wing parts in assembly drawings have
printing support legs visible, please ignore it, these legs should be removed before plane assembly.
Wing section 1
Assembly first section of left wing as sketched above. Main spars
(10x8_745) and front alignment spar (4x3_985) should be aligned flush
with base of wing_root_endcap_L part. Rear alignment spar (2x1_809)
should protrude 1 cm from wing_root_endcap_L part.
Before adding wing_L_7, prolong main spars by inserting secondary main
spars into main spars 8 cm deep and secure the spars in place with CA
glue.
When all the parts are in their position, put glue on contact points where
carbon spars are touching printed parts.