Electronics
This is by no means the best way possible how to setup your plane. It is just a brief overview of
possible options.
Motor
Turnigy Aerodrive SK3 - 3536-1200kv Brushless Outrunner
I recommend to use motor weighting roughly 110 g, to have no problems setting the CG. You
should be able to fit inside motors with diameter up to 37 mm.
Suitable propeller sizes: 13x8.
ESC
Turnigy Plush 60A or similar.
BATTERY
Turnigy nano-tech 1000mah 3S 25~50C Lipo (with roughly 80 g of additional ballast) or Turnigy
nano-tech 1600mah 3S 25~50C Lipo
You can choose other battery but keep your size and weight similar to the examples above (up to
150 g). Using these, ESC and battery are installed as much as possible in the front of the fuselage
next to each other (parallel config). For heavier batteries you need to put ESC into the front of the
fuselage area and battery behind it closer to the servos (series config).
RECEIVER
This depends on your transmitter. Only requirement is to have 7 channels.
SERVOS
Hitec HS 85-MG
It is a reliable analog servo with metal gears for very reasonable price.
Servo mounts will fit servos with dimensions up to:
A = 2 mm, B = 29 mm, C = 40 mm, D = 13 mm, E = 20 mm