16
GB
ENGLISH
Technical Data
Electric heater GEH 3 P
Art. No ................................................................................................................................................................................................05174
Service connection ..................................................................................................................................................230 V~50 Hz
Max. Power .................................................................................................................................................... 3 kW (2580 kcal./h)
Heating degrees .................................................................................................................................................... 1,5+3 kW/Fan
Current consumption .......................................................................................................................................................13,04 A
Fan power ..........................................................................................................................................................................320 m3/h
Weight .......................................................................................................................................................................................4,1 kg
Read and understand the operating instructions
before using the appliance. Abide by all the safety
measures stated in the service manual. Act responsib-
ly toward third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
Electric heaters are used in construction, shipbuilding, ag-
riculture, car repair services, gastronomy, installations and
where oil or gas heaters are not required or permitted.
The device may only be operated standing on the ground
and fully assembled. Operating on an unstable surface is
not permitted.
Do not use this product in any other way as stated for
normal use. Respecting technical data and safety pre-
cautions.Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
Power tool description
1.
Handle
2.
Power supply cable
3.
Protective grille
4.
Switch Power regulator
5.
Thermostat regulator
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fitted with a first-aid kit. It is essential to
replace any used material in the first-aid kit immedia-
tely after it has been used.
If you seek help, state the following pieces of infor-
mation:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Qualification:
Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
Minimum age:
The product has been designed to be
used by persons over 16 years of age. If the product is
to be used by children below the age of 8 or persons
with reduced physical, sensory or mental skills or
with a lack of experience and knowledge, they must
be supervised or instructed in the safe use of the
appliance and understand the resulting risks. Children
must not play with the appliance. Cleaning and user
maintenance must not be performed by children
without supervision.
Children below the age of 3 must be kept away unless
being under constant supervision. Children over the
age of 3 and below the age of 8 may only turn the de-
vice on and off if supervised or instructed on the safe
use of the device and understand the resulting risks,
provided that the device is placed and installed in a
common position for use. Children in this age group
may not plug, control, clean and/or service the device.
Training:
Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.
The operator is responsible for accidents or risks to third
parties.
