For assembly, the coupling halves can be heated to approx. 80 °C and
pushed onto the shaft ends while warm.
CAUTION
Hot surfaces!
Burn injury to skin if touched.
1.
Wear protective gloves at temperatures
≥
48°C.
●
Mount the coupling halves on the shaft ends but avoid impacts on the
components.
●
Position the coupling halves on the shaft ends so that in later operation
the "E" gap dimension is maintained.
●
Secure the coupling halves by tightening the setscrews.
●
Insert the spider in a coupling half.
Gear pump BT / BTH
32
2021-02-05 88026290002-04
