2
Safety
2.1
Intended use
1.
The device has been designed for operation with fluid. Dry operation is
not permitted.
2.
The device may be operated in filled condition only.
The medium must be compatible with the materials used in the device.
The chemical competence is necessary for this. Be careful with ethylene
oxide or other cathalytic or exothermic or self-decomposing materials.
Please consult the manufacturer in cases of doubt.
3.
The device may be operated only in usual industrial atmospheres. If there
are any aggressive substances in the air, always ask the manufacturer.
4.
Operation of the device is only permissible when complying with the op-
erating instructions and applicable documents.
Deviating operating conditions require the express approval of the man-
ufacturer.
5.
In case of any use of the device not according to specification, any war-
ranty is voided.
2.2
Personnel qualification and training
The staff designated to assemble, operate and service the device must be
properly qualified. This can be through training or specific instruction. Per-
sonnel must be familiar with the contents of this operating instructions.
Read the operating instructions thoroughly before use.
2.3
Basic safety instructions
1.
Comply with existing regulations on accident prevention and safety at
work along with any possible internal operator regulations.
2.
Pay attention to the greatest possible cleanliness.
3.
Wear suitable personal protection equipment.
4.
Do not remove, make illegible or obliterate type plates or other referen-
ces on the device.
5.
Do not make any technical changes on the device.
6.
Maintain and clean the device regularly.
7.
Use spare parts approved by the manufacturer only.
Gear pump BT / BTH
88026290002-04 2021-02-05
7
