35
KPS-MT60 • Digital multimeter
ENG
voltage, the display will simultaneously show the voltage polarity which is
connected with red test probe.
•
Press FUNC key to switch AC voltage, DC voltage measurement.
4.11 Ω Measurement
• Resistance range of this meter: 660,0Ω, 6,600kΩ, 66,00kΩ, 660,0kΩ,
6,600MΩ, 66,00MΩ.
To measure resistance:
•
Rotate rotary switch to
•
Respectively connect black and red test probes to COM input socket and
VΩ input socket.
•
Measure the resistance value of circuit to be tested with other two ends of
test probes.
•
Read the measuring resistance value from LCD display.
4.12
Measurement
•
When measuring resistance, press FUNC key to switch to continuity test.
• Respectively connect black and red test probes to COM input socket and Ω
input socket.
•
Measure the resistance value of circuit to be tested with other two ends of
test probes
•
During continuity test, if the measured circuit resistance is not greater than
about 50Ω, the buzzer may issue continuous sound.
4.13
Measurement
•
When measuring continuity, press FUNC key to switch to diode test.
• Respectively connect black and red test probes to COM input socket and Ω
input socket.
•
Measure two ends of diode to be measured with other two ends of test
probes
•
The meter will display the forward voltage drop value of the diode.
4.14 Capacitance measurement