1 4
MAIN BURNER
Periodically inspect all burner flame
holes with the heater running. All
slotted burner flame holes should
be open with yellow flame present. All
round burner flame holes should be
o p e n w it h a s m a ll b lu e f la m e
present. Some burner flame holes
may become blocked by debris or
rust, with no flame present. If so,
turn off heater and let cool. Either
remove blockage or replace burner.
B loc k ed bu rn er flam e h o les w ill
create soot.
SPECIFICATIONS
GSN2221 GSP2222
Btu(Variable) 20000/22,000BTU/H
G a s T yp e ( G S N 2 2 2 1 ) N a t u r a l
(GSP2222) Propane/LP
Ignition Piezo
GSP2222 Model
Manifold Pressure 8.0"W.C.
Inlet Gas Pressure
(In. of water)*
Maximum 14"
Minimum 11"
GSN2221 Model
Manifold Pressure 3.0"W.C.
Inlet Gas Pressure
(In. of water)*
Maximum 10.5"
Minimum 5"
Dimensions, Inches (H
×
W
×
D)
Figure 24-Pilot Inlet Air Hole
Stove 23 5/8"
×
27 1/2
”
×
11 1/2"
Carton 28"
×
29 1/2
”
×
13 3/4
”
Weight, pounds
Stove 58 lbs.
Shipping 67 lbs.
GSN3011 GSP3012
GSN3013 GSP3014
Btu(Variable) 20000/30,000BTU/H
Gas Type (GSN3011 & GSN3013)
NATURAL
(GSP3012 & GSP3014)
Propane/LP
Ignition Piezo
GSP3012 & GSP3014 Models
Manifold Pressure 8.0"W.C.
Inlet Gas Pressure
(In. of water)*
Maximum 14"
Minimum 11"
GSN3011 & GSN3013 Models
Manifold Pressure 3.0"W.C.
Inlet Gas Pressure
(In. of water)*
Maximum 10.5"
Minimum 5"
Dimensions, Inches (H
×
W
×
D)
Stove 25 4/5"
×
32 1/4
”
×
13"
Carton 25 1/8"
×
34 1/8
”
×
12 7/8
”
Weight, pounds
Stove 74 lbs.
Shipping 83 lbs.
*For purposes of input adjustment
CABINET
Air Passageways
l
Use a vacuum cleaner or
pressurized air to clean.
Exterior
l
Use a soft cloth dampened with a
mild soap and water mixture. Wipe
the cabinet to remove dust.
LOGS
l
If you remove logs for cleaning,
refer to Installing Logs to properly
replace logs.
l
Replace logs if broken or chipped
(dimesized or larger).
REPLACEMENT PARTS NOTE:
U s e o n ly o r ig in a l r e p la c e m e n t
parts. This will protect your warranty
coverage for parts replaced under
warranty.
PARTS UNDER WARRANTY
Figure 23 -Injector Holder on Outlet
Burner Tube
Contact authorized dealers of this
product. If they can't supply original
replacement part(s) call the number
o n t h e b a c k o f m a n u a l. w h e n
contacting your dealer or World
Marketing,
have ready:
l
Your name
l
Your address
l
Model and serial numbers
of your heater
l
How heater was malfunctioning
l
Type of gas used (propane/LP or
NG)
l
Purchase date
l
Usually, we will ask you to
return the defective part to the
factory.
l
Warranty card.
PARTS NOT UNDER
WARRANTY
Contact authorized dealers of this
product or Parts Central. If they can
’
t
supply original replacement part(s) call
World Marketing
’
s t number on the
front page.
ACCESSORIES
Purchase these heater accessories
fro m yo u r lo c al d ea ler o r P arts
Central. This part is not currently
available from World Marketing.
EQUIPMENT SHUTOFF VALVE-
Equipment shutoff valve with 1/8"
NPT tap.
Burner
FLEXILBE GAS HOSE
Flexilbe gas hose is used for connect-
ing the heater to gas supply.
the flexilbe hose must be CSA
Approved.
