LOG SET INSTALLATION
STEP 1: #W5, #W6, #W7 LOG PLACEMENT
NOTE: Log numbers are located on the bottom of each log. Refer to following instructions and illustrations for proper placement.
CAUTION: Do not place logs directly over burner port holes. Improper log placement may affect flame appearance and cause excessive
soot to build up on logs and glass.
PAGE 23
Position #
W8
, #
W9
, & #
W10
logs, aligning to notches in base logs.
Position base log
#W5
by aligning cut out over pilot assembly and slots in bottom of log over burner
cover brackets. Press down slightly to secure in place. Position #
W6
and #
W7
logs onto burner center.
NATURAL GAS MODELS:
Position backsides of #
W6
& #
W7
logs up against burner tube.
STEP 2: #W8, #W9, & #W10 LOG PLACEMENT
W8
W9
W10
Randomly place „Klinkers” in this area. Do not place „Klinkers” directly on burner ports.
Use a steel or stiff bristle nylon brush to distribute Rock Wool Embers onto logs and burner.
W7
W6
W5
Summary of Contents for Windim-WDM 56101
Page 40: ...PAGE 39...
Page 41: ...PAGE 40...
