40
OPERATING INSTRUCTIONS
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
#SLA-60 R.8 March 2022
10.8.3 Temperature Display
To change the temperature display between Celsius and Fahrenheit,
Remove the battery cover from the back of the control. Slide the
switch to desired temperature scale. Reinstall batteries and battery
cover
10.8.4 Child Lock
To lock the remote to avoid unsupervised operation,
Press and hold the MENU and UP arrow buttons simultaneous for 4
seconds to enable or disable the child lock feature.
10.8.5 Turn ON the Appliance
With the system in the OFF position, press the remote control POWER
button to turn ON the appliance.
•
The appliance will attempt to ignite the pilot (if Pilot-on-Demand
function is OFF). Once the pilot flame is rectified, the main
burner will ignite.
•
Whenever the appliance is cycled from OFF to ON, the main
burner will light on high for 10 seconds before returning to the
previous user setting.
•
All functions can be accessed when the remote control is ON.
Only active functions will be displayed when the remote control
is ON.
1. The transmission indicator icon will flash and a single beep will
confirm the reception of the command.
10.8.6 Turn OFF the Appliance
With the system in the ON position, press the remote control POWER
button to turn OFF the appliance.
•
Functions AUX1, AUX2, and Pilot-on-Demand can be accessed
when the remote control is OFF. Only active functions will be
displayed when the remote control is OFF.
•
The transmission indicator icon will flash and a single beep will
confirm the reception of the command
10.8.7 Pilot Ignition Selection (Intermittent
or Pilot-on-Demand)
This system has the option of a pilot-on-demand, allowing the system
to change from a spark-to-pilot system to the pilot-on-demand
option. The pilot-on-demand will keep the firebox warm and establish
a draft in the vent, which allows the main burner to ignite with less
air-flow disruption.
To select the preferred
1. Press the MENU button to activate the menu.
2. Using the UP and DOWN arrows, highlight the PILOT icon and
press SELECT.
3. Use the UP and DOWN arrows to turn the pilot-on-demand ON
or OFF, then press SELECT.
•
The transmission indicator icon will flash and a single beep will
be emitted from the control module indicating pilot-on-demand
feature has been activated. The remote control screen will
display the snowflake with text PILOT icon.
•
The transmission indicator icon will flash and a double beep will
be emitted from the control module indicating the pilot-on-
demand feature has been deactivated. The remote control will
not display the snowflake with text PILOT icon.
10.8.8 Flame Adjustment
This control system has (5) flame levels. Flame height will not be
adjustable for the first (10 )seconds when the appliance is turned ON.
The control system will remember the previous flame level setting
and will automatically adjust after (10) seconds.
To adjust the flame level,
1. Press the MENU button to activate the menu.
2. Using the UP and DOWN arrows, highlight the FLAME icon and
press SELECT.
3. Use the UP and DOWN arrows to adjust the flame level to desired
setting, then press SELECT.
The transmission indicator icon will flash and a single beep will confirm
the reception of the command
