#CLW-ST R.1 February 2021
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
FRAMING
13
Nailing flange installed
Stand-off flange
Nailing flange
as shipped
Framing stud
Nailing flange
Framing Stud
Nailing flange
installed
Nailing flange
Nailing flange
Nailing flange
Framing studs
Framing studs
Framing studs
Framing Stud
Nailing flange
Nailing flange
2
½
”
(64mm)
Clearance
2
½
”
(64mm)
Clearance
2
½
”
(64mm)
Clearance
2
½
”
(64mm)
Clearance
Vertical Venting
Horizontal Venting
BACK VIEW
FRONT VIEW
TOP VIEW
FRONT VIEW
Stand-off flange
Stand-off flange
3.3 Nailing Flange Assembly
and Installation
CAUTION: Never permanently remove these assemblies from the
fireplace—they must be secured regardless of finish material used.
The nailing flanges MUST BE INSTALLED for all applications.
1. Remove (4) nailing flanges from the right and left side of the
fireplace.
2. Align nailing flanges with holes on the outside corners of
fireplace, with the stand-off flanges on the nailing flanges facing
away from the fireplace.
3. Secure the nailing flanges to the fireplace with screws (provided)
through the slots in nailing flanges.
4. Bend perforation on nailing flange until parallel with fireplace
face. Do not bend toward fireplace face.
5. UNTIL ALL FRAMING REQUIREMENTS ARE COMPLETED:
Position framing stud against the small stand-off (located on
backside of nailing flange). Secure with nails or screws. For
securing nailing flanges for horizontal terminations at the vent
pass-through, refer to Figure 3.4 on page 14.
•
When installed, the nailing flanges provide the minimum
2½” (64mm) clearance from the sides of the fireplace to
framing.
Figure 3.3, Nailing Flange Installation
ALL DESIGN OPTIONS INSTALLATION
