26
INSTALLATION
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
#ABY R.2 October 2020
6.0 INSTALLATION
6.1 Chimney Requirements
IMPORTANT: Do not connect this fireplace to a chimney flue serving
another appliance.
•
Minimum Chimney Height: 12' (3.66m)
•
Maximum Chimney Height: 50' (15.24m)
•
Elbows: A maximum of (4) 30° elbows may be used (2 sets of
offsets)
•
Maximum Offset: 4' (1219mm)
If (2) 30° elbows are used, chimney height must be a
minimum of 14' (4.27m).
If (4) 30° elbows are used, chimney height must be a
minimum of 25' (7.62m)
6.2 Approved Chimney Systems
CAUTION: DO NOT fill required clearances between chimney and
combustible with insulation.
This fireplace must be connected to a listed UL 103 HT insulated 6"
diameter chimney and/or CAN/ULC S629 of any vent manufacturer.
The following vent manufacturers listed are, but not limited to,
approved UL103-HT vent pipe.
•
Selkirk:
UltimateONE, SuperVent (JSC), Ultra-Temp HT, Galva-
Temp HT, Sure-Temp
•
Simpson Dura-Vent:
Dura-Plus, Dura-Tech,
•
AmeriVent:
AmeriVent TLC, HS
•
ICC:
Excel
Follow chimney manufacturer’s instructions for proper chimney
installation, clearances to combustibles, and support bracket
requirements.
The entire chimney system must be installed to meet all local
requirements, as well as chimney manufacturer requirements.
Follow the chimney manufacturer’s instructions for the installation
and maintenance of a flashing/storm collar assembly (this prevents
water from entering the house at the roof line).
6.3 Anchor Plate Installation
IMPORTANT: The appropriate anchor plate must be purchased with the
chosen chimney system. Sealant and screws for attaching the anchor
plate to the fireplace are included with this unit.
IMPORTANT: The anchor plate must fit into flue collar on fireplace to
prevent creosote leakage.
1. Place a bead of sealant under the chimney anchor plate.
2. Push plate collar into fireplace flue. Secure with (4) screws.
Figure 6.1, Anchor Plate Installation
ANCHOR PLATE
ANCHOR PLATE
FLANGE
FIREPLACE FLUE
Sealant
Anchor Plate
Secure with (4) screws
