kozy heat 911-XXL, Installation And Operation Manual

Page: 8 / 39

PLACEMENT CLEARANCE REQUIREMENTS
This fireplace must be installed on a level surface capable of supporting the fireplace and venting.
This fireplace insert is to be installed into a solid fuel masonry or factory built non-combustible fireplace that has been installed in
accordance with the National, Provincial, State and local building codes.
Due to high surface temperatures, fireplace should be located out of traffic and away from furniture and draperies.
This fireplace may be installed in a bedroom.
Please be aware of the large amount of heat this fireplace will produce when determining a location.
SPECIFICATIONS
PAGE 7
ADDITIONAL COMPONENTS REQUIRED
Vent System; Part #815-CL : For use with minimum 6” x 8” I.D. masonry or 8” I.D. Class A metal chimneys - Includes 12ft. (3.66m)
compressed, expandable to 25ft. (7.62m) co- linear 3” x 4” flexible chimney, and termination cap.
Part #510: Used in conjunction with #815-CL to extend termination up to a maximum of 40ft. (12.19m).
Other approved venting : Selkirk
Shrouds - 3 pc & 4 pc.: Standard shrouds are available for this insert and will fit most applications. Custom shrouds may be ordered on a
non-returnable basis. When ordering a custom shroud, please specify existing fireplace front opening height and
width. Grill set (required) in various finishes purchased separately.
or
Blank Shrouds - 3 & 4 pc.: Blank shrouds are available for on-site custom fit applications and are sized to the opening after the insert has
been installed. The interior perimeter is properly sized to fit onto the insert. The outer perimeter must be cut,
formed and finished (painted). Grill set (required) in various finishes purchased separately.
or
Full Door Shrouds: Full door decorative shrouds are available for this insert and are used in place of a standard or blank shroud.
#911XXL COMPONENTS LIST
XXL-770 Millivolt Board Assembly
700-203 Manual Gas Shut-off Valve
XXL-135 Burner Assembly
XXL-G900 Refractory Set
XXL-500 Log Package
700-01T Glass with Gasket
XXL-005 Glass Valance
OCK-S47A LP Conversion Kit
815-CL2 Co-Linear Air Chute
XXL-028 Fan Kit (2)-75 CFM
900-085 4” Restrictor Plate
#911XXL-RAD COMPONENTS LIST
XXL-770 Millivolt Board Assembly
700-203 Manual Gas Shut-off Valve
XXL-135 Burner Assembly
XXL-G900 Refractory Set
XXL-500 Log Package
700-01T Glass with Gasket
XXL-005 Glass Valance
OCK-S47A LP Conversion Kit
815-CL2 Co-Linear Air Chute
900-085 4” Restrictor Plate