Figure 6: manual control
not, the device does not accept manual output control requests and only scheduled switching and the
Watchdog
feature are in operation. Pressing
All off
button will turn all outputs OFF.
5.1.2
Output status and configuration
On the left side of the window, click
Status & configuration
, the list of ports and status information
appears in the right window.
To setup specific port select in the column
Select
and click
Modify
.
On the new page that will appear you can set up detailed parameters of this specific port. Signifi-
cance of the individual parameters is described in the following text.
Output configuration
•
No.:
Port number (0 - 3)
•
Name:
Port (Output) name
•
PON state:
Default output state after NETIO power on – if you tick the checkbox, the port will be
turned ON after the NETIO start or restart.
•
Manual control:
If you select this option it will be possible to control the output manually.
•
Time control:
If you select this option the port will be switched on by timer the configuration of
which is given below.
•
Timer mode:
Specifies how often the scheduled ON/OFF switching will be performed. Op-
tions:
ONCE
- event will occur only once,
DAILY
- event will be triggered everyday or
WEEKLY
-
8
Summary of Contents for NETIO-230B
Page 1: ......
Page 10: ...Figure 7 set up ports Figure 8 output configuration 9...
