User’s Manual
NETIO-230A
www.koukaam.se
18
5.3.4
List of commands for Telnet / serial link
login <name> <password>
User login with open password.
Example:
Using
login admin admin
you will login with username
admin
and password
admin.
clogin <name> <encrypted_password>
User login with encrypted password.
version
Shows current firmware version.
alias
Shows current device alias (your name for this device).
quit
Logout.
reboot
Logouts the current session and restarts the device.
port <output> [0 | 1 | manual | int]
Shows current status and allows to change the status:
•
If you enter only output number, output status shows
(0 - OFF / 1 - ON)
•
Output number and
0/1
parameter – disables / enables output
•
Output number and '
manual
' parameter – enables manual output control
•
Output number and '
int
' parameter – interrupts output
Example:
Command
port 2 1
will turn ON output 2.
port list [xxxx]
•
Without any parameters it lists current status of all outputs
•
xxxx
command can control all outputs simultanously
•
instead of
x
enter commands:
o
0 – to turn the output OFF
o
1 – to turn the output ON
o
i – to interrupt the output
o
u – to leave the output without any change of its status
Example
: Command
port list 01ui
will turn output 1 OFF, turn output 2 ON, output 3 will
remain unchanged and output 4 will be interrupted for a short while.