User’s Manual
NETIO-230A
www.koukaam.se
11
OFF time:
Date and time to switch the output OFF. If you select the DAILY mode it is the
date and time of the first execution.
Week schedule:
Select in which week days the Timer control should be in operation.
Interrupt delay (s):
Time in seconds for which the output should be turned OFF when the
Interrupt
function is used either in the manual mode or when the Watchdog
feature is in operation.
5.1.2.2
Watchdog
Watchdog
feature allows to monitor if your network devices are in proper operation. If the monitored
device does not respond to a Ping command in specified time, the power outlet with enabled
watchdog will be turned OFF for specified time and then switched back ON. To avoid cycle power
OFF/ON of defective monitored device, it is possible to setup maximum allowed number of output
restarts (default value 3).
Enable:
Check to turn on the
Watchdog
feature.
IP address:
IP address of the network device that will be monitored.
Timeout (s):
Maximum Ping response time.
PON delay (s):
Time in seconds in which the Watchdog feature will not be active after the
output restart. During this interval the monitored device is supposed to
recover its normal operation after being restarted.
Ping interval (s)
:
Interval in seconds in which the Ping requests to the monitored device will be
sent.
Max retry:
Maximum allowed number of output restarts for the case that monitored
device does not respond to a Ping command. After the maximum number of
retries is reached the output will stay OFF.
Retry POFF:
Enables or disables
Max retry
option.
Send e-mail:
Sends out an informative e-mail that the monitored device didn’t respond and
has been restarted. Also if the Max retry threshold is reached the informative
e-mail is sent out.
Save your new settings by pressing the
Apply
button.