Kospel EPS - 3,5, Manual

Page: 2 / 8

2
Please, read and follow the installation and operating instructions carefully, to ensure the long life
and reliable operation of this appliance.
The manufacturer may make minor changes in the appliance if necessary. They will not be exposed
in the operating instruction, so long as the main features of the heater remain the same.
EPS electric instantaneous water heater is designed to heat domestic water in households, sanitary
rooms, labs, plants etc., in other words, everywhere where there is a demand for instant hot water.
Turning the hot water tap on, automatically starts up the heater (a red light on the heater’s outer case
comes on). Water is heated instantly as a result. The temperature of heated water depends on the rate
of flow: the greater the flow, the lower the temperature. Turning the hot water off, shuts the appliance.
Purpose
Working and safety
conditions
- the appliance should be installed and the reliability of electric shock protection should be tested
by a professional person,
- the appliance has to be earthed or neutrally grounded,
- the appliance has to be permanently connected to the electrical system,
- the appliance can be used only after proper installation (and make sure that it is in a faultless
technical condition!)
- the appliance should be vented (see “Venting”) before the first use and each time after emptying
the heater out of water (e.g. during conservation of a water supply system),
- be alert not to let the working appliance be emptied of water, which may happen with the shortage
of water in a water supply system,
- do not open the front case of the water heater while it is in on,
- do not either install any additional appliance to the tap pipe or plug it while water is flowing,
- remember that water at 40°C temp. may bring forth the feeling of burning (especially in case of
children).
This product must not be treated as a communal waste. Dismantled
appliance ought to be given to an appropriate recycling point for
electrical and electronic waste. Appropriate disposal of the used
product prevents potential negative influence on the environment,
which could occur in case of an improper waste disposal.
In order to obtain more detailed information on the recycling of
the product, contact your local authority, refuse disposal services
or the store, where the product has been purchased.
ATTENTION!
If the inseparable supply cord will become damage, it should be replaced at the manufacturer
or in special repair shop or by a qualified person in order to avoid all risks.