3
GB-0
Safety instructions
1. Read and strictly follow the installation and operating instructions to ensure a
long life and reliable boiler operation.
2. An efficient electrical installation which has been completed in accordance with
the binding norms of electric installation.
3. A wet central heating system equipped with appropriate expansion vessel made
according to the binding norms of hydraulic installation.
4. A wet central heating system must be flushed before boiler installation.
5. Do not install any barrier fittings (e.g. valves) on the outlet of the safety valve.
6. Boiler must not be installed in a humid place or in a place exposed to the danger
of explosion.
7. Boiler installation and all electrical and hydraulic work must be performed by a
qualified professional installer only.
8. All installation work must be performed when the power and water supply is cut
off.
9. Electric installation should be equipped with residual current protective devices
and other solutions which will ensure disconnecting the heater from the source
of power (intervals between all their poles should not be less than 3 mm).
10. Do not cut off the power supply between the heating seasons. Despite the knob is
set in „OFF” position, the boiler will start the pump every 24 hours for 90 seconds
to protect the installation.
11. Do not drain the water from central heating system after the heating season.
12. Before the heating season boiler should be checked by the service point.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
