17
• After completely having emptied the mixing jug, immediately fill water in the jug
and operate the blender in Pulse-position for a few seconds (Autoclean-function).
Then take the mixing attachment of the engine block, wash it and rinse it off with
clean water. Then dry it completely.
04
PE - LD
Danger of injury!
caution: The blades are very sharp.
• Switch off the appliance and disconnect it from the mains (12).
• The appliance and accessories are not dishwasher safe. If any accessories need
to be cleaned, they may be cleaned individually. caution! Put all accessories back
in its right place after cleaning process.
• After having removed the mixing attachment (10) as described above you can
remove the blades. By turning the blades clockwise, you can remove the blades
from the block. You can now clean the blades. caution! The blades are very
sharp, danger of injury!
Assembling the mixing attachment
Make sure the appliance is only operated if the mixing attachment (10) is completely
and correctly installed. In order to do so, follow the above steps in reverse order
ENGLISH
Instruction Manual
instruct_24001_blender_KORO_05-12.indd 17
21.04.12 11:25
