15
the engine block. The mixing attachment (10) is now locked. In case the mixing
attachment (10) was not installed correctly, the blender will not start working.
04
PE - LD
Safety button
The blender includes a safety button (9). The blender can only be switched on with
the speed control switch (8) if the glass jug (3) was installed correctly on the engine
block.
Handling foods
If you want to mix/puree solid ingredients, cut them into 2cm-3cm pieces. Do not
fill the mixing jug with large quantities. Always pour some fluid into the mixing jug
before filling the mixing bowl with solid ingredients. The max. capacity is 1.25 liters.
• Fill the ingredients in the glass jug (3) (fruit, vegetables, juices, etc.)
• close the glass jug (3) with the lid (2). Place the removable lid (1) on the mixing
attachment (10) as well. By turning it clockwise, it is locked.
• Make sure the lid is closed.
• connect the appliance to the mains and switch the appliance on by turning the
speed control switch (8) to the desired speed.
• In order to add ingredients during the mixing process remove the smaller lid (1)
from the main lid (2) and add ingredients through the open spot in the lid (2).
• During the mixing process you should place one hand on the appliance.
• When handling more solid or thick ingredients, we recommend to operate the
appliance in Ice crush/ Pulse- Position in order to prevent the blades from being
blocked.
• After the mixing process, turn off the appliance (0-position) and disconnect it from
the mains.
• In order to remove the mixing attachment (10) from the engine block, simply lift it
straight up. Do not turn the mixing attachment while lifting it.
ENGLISH
Instruction Manual
instruct_24001_blender_KORO_05-12.indd 15
21.04.12 11:25
