ShenZhen Korno Import&Export Co.,Ltd
http://szkorno.en.made-in-china.com
13
Run/stop
Pump switch/
Timing detection switch
Invalid
Invalid
Power
On/Off(press and hold for 5 seconds)
On/Off(press and hold
for 5 secondseconds)
On/Off(press and hold for 5
seconds)
Print instant gas concentration data
Invalid
Invalid
CAUTION: GT-1000 series multifunctional gas detector will perform normally Only in condition of the pump was switched on
5.2Power On
Long press
power button for five seconds
until you hear a beep
the “DI”
sound then the display and red signal light turn on,The screen
appears:Korno’s logo (3 seconds),Sensor information(1 second) ,Sensor
preheating and automatically start the pump(60 seconds count down)in
sequence as it show in figure 1-3,detector will start after the count down and enter detection interface as figure 4.
When the GT-1000 completes its startup sequence,it is in Measuring Mode.
The fan symbol in the upper right corner will appear
