38
Performance Edit mode
In Performance Edit mode you can change the program numbers that are assigned
to each timbre of a Performance, and modify the controller settings etc. The dia-
gram below shows the parameters that can be set for each timbre, and how a
Performance is organized.
How to enter Performance Edit mode
1) In Performance mode, first select the performance that
you wish to edit.
2) Press the
〈
PERF EDIT
〉
switch. An LCD like the one to
the right will appear.
Caution when editing a Performance
A performance that you have finished editing will be preserved until you select a different performance in
Performance mode, or turn off the power.
If you wish to keep a performance that you edited, you must Write the performance ( p.46).
The programs for each timbre of a performance are stored only as program numbers; the actual data for the
programs is not contained in the performance data. This means that if you edit a program that is used by a
performance, or exchange it with another program, the sound of the performance will also change.
Structure of the Performance Edit mode
Page
Parameter
Parameter value
CONTROLLER
AS
AP
AL 4
AL 3
AL 2
AL 1
AW 2
AW 1
· TYPE
· MODE
· RANGE
· SW
TIMBRE 8
TIMBRE 7
TIMBRE 6
TIMBRE 5
TIMBRE 4
TIMBRE 3
TIMBRE 1
TIMBRE 2
PANPOT
ZONE
TIMBRE SEL
VEL CURVE
A T CURVE
FILTER
TIMBRE A
TIMBRE B
PROGRAM
ON/OFF
LEVEL
PITCH
PANPOT
ZONE
FILTER
Control
external
MIDI devices
Control the
internal tone
generator
RENAME
WRITE
Support functions
for Performance
editing
TIMB COPY
CTRL COPY
MACRO
PERFORMANCE
PROGRAM
LEVEL
PITCH
CHANNEL
