19
Basic operation
Editing
1. On the front panel, find the parameter that you wish to edit. (Parameters for each mode are printed above
the select switches.)
2. Press the appropriate mode switch.
Press a select switch to choose the display page.
Use the
〈
CURSOR
〉
switches to move the cursor so that the value that you wish to modify begins to blink.
3. Use the
〈
VALUE
〉
slider or the
〈
VALUE
〉
switches (
〈
+1/YES
〉
〈
-1/NO
〉
switches) to modify the value.
GLOBAL
CHANNEL
CONTROLLER
CONTROLLER
BRIGHTNESS
TIMBRE SEL
FX1 TYPE
LOCAL
VEL CURVE
PROGRAM
VEL CURVE
LEVEL
FX1 PARAM
EX FILTER
A.T CURVE
SW/
CHANNEL
A.T CURVE
ATTACK
FX2 TYPE
AFT.T FILT
PROG
PROTECT
ASGN.SW
POL
LEVEL
TIMB COPY
DECAY
FX2 PARAM
DAMP.P POL
PERF
PROTECT
PITCH
CTRL COPY
RELEASE
PAGE MEM
PANPOT
MACRO
KEY TOUCH
PRELOAD
DATA DUMP
SYS NAME
ZONE
RENAME
FX1 DEPTH
RENAME
MIDI RESET
CALIB
FILTER
WRITE
FX2 DEPTH
WRITE
1
2
3
4
5
6
7
PIANO1
PIANO2
PIANO3
ORGAN1
ORGAN2
8
9
10
11
12
13
14
15
16
PERF EDIT
PROG EDIT
PERFORMANCE
PROGRAM
SCALE
/BEND
E.PIANO1
BELL/VIBES
COMP
STRINGS
E.PIANO2
E.PIANO3
PF LAYER
E.P.LAYER
PAD1
PAD2
BASS
Parameters assigned to each select key in Global mode
Performance/Program numbers assigned to each select switch in Performance/Program mode
Parameter pages of Global / Performance Edit / Program Edit mode
Parameters assigned to each select
switch in Performance Edit mode
Parameters assigned to each select
switch in Program Edit mode
Sounds assigned to each select
switch in Program mode
The editing screens
Each of the displays that appear in the LCD are called
screens. Related functions and parameters are grouped to-
gether, and referred to as pages. The page number is shown
in the upper left of the LCD.
Selecting pages
By pressing a select switch, you can directly select the first screen in each page.
Since the screens of each mode are organized as follows, you can use the
〈
CURSOR
〉
switches to move
between pages within each mode.
〈
VALUE
〉
switches (
〈
+1/YES
〉
〈
-1/NO
〉
switches)
Use these switches to modify the blinking parameter value in steps of one unit. If you continue pressing the
switch, the value will continue to change.
These switches are also used to reply “YES” or “NO” to a display which asks you “OK?”
In addition, pressing both switches simultaneously will bring back the value that had been selected when
you selected that parameter (the UNDO function).
〈
VALUE
〉
slider
Use this slider when you wish to make large changes in the blinking parameter value. To make fine adjust-
ments, use the
〈
VALUE
〉
switches (
〈
+1/YES
〉
〈
-1/NO
〉
switches).
Page
Parameter
Parameter value
~
01
02
02
02
03
03
04
04
↓
↓
↓
↓
Page 1
Select
switch 1
Page 2
Page 3
Page 4
Group
Group
Use the
〈
CURSOR
〉
switches to move
Mode
Select
switch 2
Select
switch 3
Select
switch 4
Screen
