Connecting a Pa-Series instrument to an external controller |
27
2
Make the external controller control Brightness on the X-axis, Resonance on
the Y-axis.
Still in the
X-Y Pad
page, program the X/Y pad. Assign to the X-axis CC#74
(corresponding to the Brightness parameter), to the Y-axis CC#71 (corre-
sponding to the Resonance parameter).
3
After having edited the parameters, press the
Write
button to save the set-
ting in the controller’s memory. Then press the
Close
button to close the
dialog.
Connect the devices
4
Connect the
USB
or
MIDI OUT
port of the external controller to the
USB
HOST
or
MIDI IN
port of the Pa-Series instrument. Be sure the external con-
troller’s USB port is enabled.
USB HOST
USB
(TO HOST/DEVICE)
MIDI IN
MIDI OUT
