Connecting a Pa-Series instrument to an external controller |
9
As an alternative, you can set it to the Local Off status, to only allow it to play
via MIDI the sounds of the Pa-Series instrument, and not its own.
Configure the Pa-Series instrument
4
In the Pa-Series instrument, go to the
Global > MIDI > General Controls
page,
and use the
Midi Preset
pop-up menu to choose the
Master Kbd
MIDI Preset.
You can go to the
Global > MIDI > MIDI IN Channel
page to see how MIDI
channels for the Keyboard Sounds are programmed.
MIDI IN Channel
Keyboard Sound
Ch01
Global (Upper 1-3, Lower Sounds)
This setup will let the external keyboard, transmitting on MIDI channel 1, play
all the Sounds on the keyboard.
Play
5
Play the master controller. Notes played on it will be considered as if they
were generated by the internal keyboard and controllers of the Pa-Series
instrument.
