Korg Nu:Tekt HA-S, Owner'S Manual

Page: 10 / 16

- 10 -
Put the batteries and close the case
1. Put the batteries [10] in.
Batteries are not included. You will need to purchase a commercially
available AA alkaline batteries.
2. Peel off the protective sheet on the cover [3], and attach the
battery cushion [11].
A protective sheet is attached to both sides of the cover. After peeling
off the protective sheet on the back side, attach the battery cushion in
the position shown in the diagram below.
3. With the printed jack names facing the jack side, put the cover [3]
on, and fasten the knurled screws [4] in four places.
Take care not to pinch the harness or other parts when closing the
cover.
Tighten the knurled screws by hand. Overtightening the screws using
a screwdriver or other tool may damage the screws or the main unit.
[4] [4]
[3]
4. Attach the rubber feet [4] onto the case.
Attach the rubber feet [12] and rating label [13] so that they do not
overlap, as shown in the diagram.