manualshive.com logo in svg

Korg M3, Parameter Manual

Share
Download
Korg M3 Parameter Manual Download Page 269

SEQ P8–1: IFX 8–1–4: IFX1

259

Insert Effect:

IFX1...4

[000...170]

IFX5

[000...153]

IFX1...5: IFX On/Off

[Off, On]

Chain:

IFX1: Chain to

[IFX2...IFX5]

IFX2: Chain to

[IFX3...IFX5]

IFX3: Chain to

[IFX4...IFX5]

IFX1: Chain

[Off, On]

IFX2: Chain

[Off, On]

IFX3: Chain

[Off, On]

IFX4: Chain

[Off, On]

Pan:#8:

Pan: #8 (Post IFX PanCC#8)

[L000...C064...R127]

Bus:

Bus (Bus Select)

[Off, L/R, 1...4, 1/2, 3/4]

AUX/Ctrl:

AUX (AUX Bus)

[Off, 1, 2, 3, 4, 1/2, 3/4]

Ctrl (FX Control Bus)

[Off, 1, 2]

Send1/2:

Send1

[000...127]

Send2

[000...127]

For more information, please see “8–2: Insert FX Setup” on 
page 99.

▼

8–1–3: Menu Command

• 0: Memory Status

☞

p.271

• 1: Panel–SW Solo Mode On

☞

p.106

• 2: Exclusive Solo

☞

p.107

• 3: Copy Insert Effect

☞

p.117

• 4: Swap Scene

☞

p.115

• 5: FF/REW Speed

☞

p.272

• 6: Set Location (Set Location for Locate Key)

☞

p.272

• 7: Put Effect Setting to Track

☞

p.288

For more information, please see “Sequencer: Menu 
Command” on page 271.

8–1–4: IFX1

Here you can edit the effect parameters of the insert effect 1 
you selected in the P8–1: IFX– Insert FX Setup page.

8–1–4a: Insert Effect 1 (IFX1)

IFX On/Off

[Off, On]

Turns the insert effect on/off. This is linked with the On/Off 
setting in the P8–1: IFX– Insert FX Setup page.

Note: If Control Assign is RT Control, you can use switches 
1–5 to turn IFX 1–5 On/Off.

Ch (Control Channel)

[Ch01...16, All-R]

This specifies the MIDI channel that will control dynamic 
modulation (Dmod) for the insert effect.

Ch01...Ch16:

 The insert effect will be controlled on the 

specified MIDI channel.

All-R:

 The channel of any track routed through this effect 

can be used to control the effect. (Channels of each routed 
track will be indicated by “*”.)

Drum Kits and the MIDI Control Channel

If a Track is using a Drum Kit, and the Track’s Bus Select 
(IFX/Indiv. Out Assign) 

(Seq 8–1–1(2)d) is DKit, this affects 

the MIDI Control Channel as well. In this case, the Track’s 
MIDI channel will be used to control any effect whose Ch is 
set to All-R, regardless of the Bus Select (Global 5–4b) 
settings or the settings of the DrumKit IFX Patch menu 
command.

P (Effect Preset)

[P00, P01...15, U00...15, ---------------]

Effect Presets let you easily store and recall all of the settings 
for an individual effect. You can store up to 16 user presets 
for each effect type, in addition to 15 re-writable factory 
presets.

The same presets appear in all of the modes (Program, 
Combination, Sequencer, and Sampling).

Note that edits to effects parameters are automatically 
stored with the Song–you don’t need to store them as an 
Effect Preset. Presets just make it easier to re-use your 
favorite settings. 

For instance, you can save an Effect Preset while working on 
a particular Song, and then later use the same Effect Preset 
in a different Program, Combination, or Song.

P00: Initial Set:

 These are the default settings that are 

recalled when you select an effect type in the Insert FX Setup 
page. You can’t save your own settings here.

P01…P15:

 These contain preset data that Korg plans to 

provide in the future. We recommend that you store your 
settings in U00–U15.

8–1

–4a

8–1

–4

Menu

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands