Reference •
Program mode
185
D (Delay)
[00…99]
This parameter delays the onset of automatic pitch
modulation.
Higher values
will produce a greater delay.
With a setting of 0, modulation will begin to apply as
soon as the note begins.
FI (Fade-in)
[00…99]
This parameter allows the automatic pitch modulation
to be faded-in, so that it will begin with a small
amount of modulation and gradually increase to the
full depth that is specified by the Intensity parameter.
Higher values
will produce a longer fade-in.
With a setting of 0, there will be no fade-in, and modu-
lation will begin immediately at the depth specified by
the Intensity parameter.
S (Key sync)
[ON, OFF]
This parameter specifies whether or not the Vibrato
will be reset each time you play a note.
With a setting of ON, the modulation waveform will
be reset each time you play a note.
With a setting of OFF, the modulation waveform of the
first-played note will continue at the standard fre-
quency, and will not be affected by subsequently-
played notes. We suggest that you set this OFF when
playing chords, so that modulation will apply to each
note in unison even if you arpeggiate the chord.
KT (Keyboard tracking)
[–99…+99]
This parameter adjusts the speed of pitch modulation
according to the keyboard location that you play.
Positive
(+) settings will cause modulation to become
faster as you play above middle C, and slower as you
play below middle C.
Negative (–)
settings will have the opposite effect.
Page 13: Vibrato controller
Vib1/Vib2 (Vibrato1/Vibrato2)
When a double oscillator program is selected, this
specifies the oscillator whose Vibrato parameters will
be edited.
You can also use the VARIATION buttons [1] or [2] to
switch between oscillators 1 and 2.
JS (Joystick up)
[00…99]
This specifies the maximum depth of the modulation
that will occur when the joystick is moved away from
you.
This is similar to the “Page 12: Vibrato” Intensity
parameter, but in this case, the specified modulation
will not be applied until you move the joystick.
Note-on
Time
Pitch
Modulation intensity
Delay Fade-in
Vib.1/Vib.2
Joystick intensity
Aftertouch intensity
JS+Af->Freq
