18
Using the ZERO8 at the 192 kHz sampling rate
By starting up the ZERO8 in the special 192 kHz audio mode, you can use
it as a high-quality 24-bit/192 kHz 8-in/8-out audio interface.
Note: When using Mac OS X, the 192 kHz sampling rate is not
supported.
Starting up in 192 kHz audio mode
While holding down the SETUP button, turn on the power.
Note: If you start up in 192 kHz audio mode, you won’t be able to
switch to other sampling rates (44.1 kHz, 48 kHz, 96 kHz).
If you want to switch to a different sampling rate, you must
turn off the power and then turn the power on again to start
up in the normal way.
Limitations in 192 kHz audio mode
The specifications are limited as follows when operating in the special 192
kHz mode.
• Number of channels: Four stereo channels (8-in/8-out)
• Channel EQ: Not available
• EXT 1, EXT 2 SEND/RETURN: Not available
• Internal effects (CH, SEND, MASTER): Not available
Controller operation when in 192 kHz audio mode
Channel controller
CH1–4
CH5–8
INPUT SELECTOR
Operates normally
Not available
GAIN
Operates normally
Not available
EQ SELECTOR
MIDI controller
MIDI controller
(transmits program change messages)
HI
MIDI controller
MIDI controller
MID-FREQ
MIDI controller
MIDI controller
MID
MIDI controller
MIDI controller
LO
MIDI controller
MIDI controller
PAN
MIDI controller
MIDI controller
EXT1(SEND)
MIDI controller
MIDI controller
EXT2(SEND)
MIDI controller
MIDI controller
ZERO FX SEND
MIDI controller
MIDI controller
SOLO
Operates normally
MIDI controller
MUTE
Operates normally
MIDI controller
CUE
Operates normally
MIDI controller
A
Operates normally
MIDI controller
B
Operates normally
MIDI controller
CH FADER
Operates normally
MIDI controller
Master controllers
CROSSFADER
Operates normally
EXT1(RETURN)
Not available
EXT1(RETURN) CUE
Not available
EXT2(RETURN)
Not available
EXT2(RETURN)CUE
Not available
ZERO FX(RETURN)
Not available
ZERO FX(RETURN)CUE
Not available
MONITOR BAL
Operates normally
MONITOR LEVEL
Operates normally
BOOTH
Operates normally
MASTER
Operates normally
