Korenix JetNet 6524G, Quick Installation Manual, Page: 5 / 28

$IWHU\RXKDYHVXFFHVVIXOO\LQVWDOOHGWKH6ZLWFK\RXFDQFRQ¿JXUHWKH6ZLWFKPRQLWRU
the LED panel, and display statistics graphically using a Web browser, such as Netscape
Navigator (version 6.2 and higher) or Microsoft® Internet Explorer (version 5.0).
7KHGHIDXOW,3DGGUHVVEHIRUHFRQ¿JXULQJLV8VHU1DPHLVDGPLQQRGHIDXOW
password is requested.
$IWHUFRQ¿JXUHGWKHOD\HUYLWXDOLQWHUIDFHV\RXFDQDVVLJQSULPDU\,3DQGVHFRQG,3
addresses to the interface, this is known as default gateway of the lower hosts. The lower
hosts in each subnet can access the interface by the default gateway IP address.
The default IP address is only available in layer 2 mode, the layer 2 mode means there is
QRDQ\FRQ¿JXUHGOD\HUYLUWXDOLQWHUIDFH$IWHUFRQ¿JXUHGWKHOD\HUYLUWXDOLQWHUIDFHWKH
default IP address is changed to the assigned primary/second IP address of the interface.
NOTE: To access the Switch through a Web browser, the computer running the Web
browser must have IP-based network access to the Switch. It is not suggested multiple
user’s access to the web browser. The performance of web display would be affected.
Warning: Since the lower hosts under the layer 3 interface can access the switch by
default gateway IP address. Please remember to change the user name and password
LQ\RXU¿UVWORJLQ2WKHUZLVHWKHXVHUVFDQHDVLO\DFFHVVWKHPDQDJHPHQWLQWHUIDFHDQG
change the settings. It obeys the common security concern.
You can also connect a computer or terminal to the serial console port or use Telnet to
access the Switch. The command-line-driven interface provides complete access to all
switch management features.
Device Management
The system may be managed out-of-band through the console port on the rear panel or in-
band using Telnet, a Web Browser, or SNMP.
1. Web-based Management Interface
2. Command Line Console Interface Through the Serial Port or Telnet