Korenix JetNet 4500 Series, User Manual

Page: 33 / 69

Korenix JetNet Series Industrial Managed Ethernet Rail Switch User’s Manual 3-15
IP Address
: You can assign the IP address that your network has reserved for your JetNet. If the
DHCP Client function is enabled, you don’t need to assign an IP address to the JetNet, as it will
be overwritten by the DHCP server and shown here. The default IP is 192.168.10.1.
Subnet Mask
: You can assign the subnet mask for the IP address here. If the DHCP Client
function is enabled, you don’t need to assign the subnet mask.
Gateway
: You can assign the gateway for the JetNet here. The default gateway is
192.168.10.254.
Once you finish configuring the settings, click on
Apply
to apply your configuration.
SNTP
The Simple Network Time Protocol (SNTP) is an adaptation of the Network Time Protocol (NTP),
used to synchronize computer clocks on the internet. You can configure the SNTP settings here
for the purpose of synchronizing the clocks of several switches on the network. SNTP is
maintained by the Internet Engineering Task Force (IETF).
SNTP Client
: Select
Enable
to acquire the current time from the SNTP server, or
Disable
to
disable this feature.
Daylight Saving Time
: You can activate
Daylight Savings Time
function here.
UTC Time-zone
: Select the time zone where the JetNet is located. The following table lists the
time zones for different locations for your reference.
Local Time Zone Conversion from UTC Time at 12:00 UTC
ADT — Atlantic Daylight -3 hours 9 am
AST — Atlantic Standard
EDT — Eastern Daylight
-4 hours 8 am
EST — Eastern Standard
CDT — Central Daylight
-5 hours 7 am
CST — Central Standard
MDT — Mountain Daylight
-6 hours 6 am
MST — Mountain Standard
PDT — Pacific Daylight
-7 hours 5 am
PST — Pacific Standard
ADT — Alaskan Daylight
-8 hours 4 am