Korenix JetNet 3005, User Manual, Page: 14 / 24

Wall Mounting
Follow the steps below to install the JetNet 3005/3008 with the wall mounting
plate.
1. To remove the DIN-Rail clip from the JetNet 3005/3008, loosen the screws
from the DIN-Rail clip.
2. Place the wall mounting plate on the rear panel of the JetNet 3005/3008.
3. Use the screws to tighten the wall mounting plate onto the JetNet 3005/3008.
4. Use the hook holes at the corners of the wall mounting plate to hang the JetNet
3005/3008 onto the wall.
5. To remove the wall mounting plate, reverse the steps above.
12