Korenix JetNet 3005, User Manual, Page: 10 / 24

Blinks
The port is transmitting or receiving
packets from the TX device.
7/port8
Off No device is attached.
Orange
The port is operating in full-duplex
mode.
Blinks Collision of packets occurs.
FDX/COL of Port
Port 7/8
Off
The port is in half-duplex mode or
no device is attached.
Port LED Status Description
Orange
The port is operating in full-duplex
mode.
Blinking
orange
Collision of Packets occurs.
Off
The port is in half-duplex mode or
no device is attached.
Green A network device is detected.
Blinking
green
The port is transmitting or receiving
packets from the TX device.
Port Status (Port 1
to Port 6)
Off No device is attached.
Table 2
Ports
RJ-45 ports (Auto MDI/MDIX): JetNet 3005/3008 has five 10/100 Mbps
auto-sensing ports for 10Base-T or 100Base-TX device connection. The UTP
ports will auto-detect 10Base-T and 100Base-TX connections. Auto MDI/MDIX
allows users to connect another switch or workstation without changing straight
through or crossover cabling. See Figure C and C-1 for the schematic diagram of
straight through and crossover cabling.
8