36
Select “Backup Config. to …” and “Restore Config. from …” command to backup and
restore the configuration of the JetIO to/from a text file. It should be noticed that you will
need to login first and then gain a privilege to do these functions.
Click “Reset to default” and “Reboot” in the popup menu to set factory default or reboot the
device. It should be noticed that you need to “rescan network” after completing the “Reset
to default” and “Reboot” activity.
Below is the related configuration information corresponding to JetIO’s Modbus registers as
well as module IP configuration for your reference (i.e., internally script command to
implement backup and restore configuration activity).
JetIO-6510 Module
[Backup]
0=irange.conf
1=snmp.trap.ips
2=alarm.conf
3=mis
4=#ip.conf
5=#alarm.limit.conf
[mis.PLCAddr]
0=40001:40002
1=41000:41003