24
Refer to above Figure as below, in the bottom field of this “Peer to Peer I/O”
page is the motoring area. It is monitoring the status both on peer-to-peer I/O
activity and internal flags. Click “Active Status” button, the dialog of
peer-to-peer I/O active status will popup to represent the status code on
peer-to-peer I/O activity.
If there is error occurred, you could directly browse the latest activity from
status code of peer-to-peer I/O activity. The status code is defined as below.
Status Code
Descriptions
0x0000
NO Errors
0x0001
Requested Content Not Satisfiable. That is, The content was well-formed but was
unable to be followed due to non-satisfiable data. For example, module type
associated with data format was NOT consistent.
0x0002
Remote Module Not Found
0xFFFF
Not Enabled the Peer-to-Peer I/O Activity
Click “Internal Flag” button, the internal flag dialog will prompt for you to
browse all the internal flags. If you use internal flags as the inputs of logic
rules and/or peer-to-peer I/O activity, you can dynamically change the flag
values in the monitoring by double clicking the Flag# row as you selected, and
then the flag values will be changed from “True” to “False”, or from “False” to
“True”.