11
Specification of Fiber port
The fiber port is provided in the JetCon 2302 only with different link
distances shown on the label that sticks on the rear side. To get a good
transmission quality, the attenuation of fiber cable should be noticed and
be considered when executing system design. To help you with your
system design, the specifications of fiber transceiver are shown in the
following table.
Fiber Port type
Parameter
Link Distance: 2KM (Max.)
Wave-length: 1310nm
Launch Power: -20dBm ~ -14dBm
Receive sensitivity: -31dBm~0dBm
Multi-mode 2KM
Link Budget: 11dBm
Link Distance: 30KM (Max.)
Wave-length: 1310nm
Launch Power: -15dBm ~ -8dBm
Receive sensitivity: -34dBm~0dBm
Single-mode 30 KM
Link Budget: 19dBm
Notes: for more than 30KM distance transmission, please contact with your
distributor for the long distance transmission product inquiries.
IEEE 802.3x Flow Control and Backpressure
The IEEE 802.3x flow control feature is available only in the switch mode.