6
2-3. Bottom View
The bottom side of JetCon 2302 is shown in the below Figure B. It includes
one 7-pin DIP switch for system configuration and one 6-pin removable
terminal block for the redundant power inputs and event alarm relay output.
To provide better communication quality and to prevent the interference,
it is strongly recommended to make well earth grounding by the “Chassis
Earth Ground Screw”.
For other configuration of DIP Switch, power input and alarm relay wiring
,
please refer to the following sessions.
System configuration
7-DIP Switch
6-pin terminal block
Connector
Chassis Grounding Screw