background image

9

Noise pollution

Operating condition

The protective device may trip and stop
the appliance in the cases listed below.

COOLING

DRY

o

Outdoor air temperature is over 52c

o

Room temperature is below 21c

o

Room temperature is below 18c

If all operation has stopped, press 

ON/OFF

button again to restart.
Timer should be set again if it has been 
canceled.

Install the air conditioner at a place that
can bear its weight in order to  operate
 more quietly.

 Install the outdoor unit at a place where
 the air discharge and the operation noise
 would not annoy your neighbors.

Do not place any obstacle in front of the
air outlet of the outdoor unit for it increases
the noise level.

 Protection

Features of protector

Inspection

After using for a  long time, the air conditioner
should be inspected on the following items:

Overheat of the power supply cord and plug 
or even a burned smell.
Abnormal operating sound or vibration.
Water leakage from indoor unit.
Metal cabinet electrified.

Stop the air conditioner if above trouble occurs.
It is advisable to have a detailed inspection after 
using it for 5 years even if none of the above occurs.

The protective device will work as follows:

Delays the compress start-up for 3 minutes after
restarting the unit or changing mode during 
operation.

Delays start-up for 20 seconds after hours of 
non operation.

  If the air conditioner runs in COOLING or DRY mode with
 the door or window opened for a long time ago when relative 
 humidity is above 80%,dew may drip down from the outlet.

Summary of Contents for ERA series






















Reviews: