40
5. SETTING DOWN THE TREADMILL
Knob
Knob
Spring
knob
To set down the treadmill, follow the steps below:
- Remove the fixing Knob from the lower end of the base frame.
- Remove the safety knob from the top end of the base frame.
- Lift the rear end of the main frame up in the vertical position by rotating
it.
- Check both holes on the main and base frame are correctly aligned,
then tighten carefully until the end of stroke (B). In order to avoid ac-
cidental falls of the main frame (2), make sure the smooth part of the
Safety Knob (B) is well inserted into the hole of this latter, thus avoiding
sudden movements.
CAUTION! Failure to secure the main frame with the Safety Knob
may cause the
treadmill accidental fall and cause personal injury.
Summary of Contents for 5902469
Page 1: ......
Page 20: ...20 TABELLA DEI PROGRAMMI PREIMPOSTATI...
Page 43: ...43 7 PRE SET PROGRAMS CHART...
